You changed something, but your reports still show the old numbers? Or data from a platform suddenly stopped coming in? In almost every case, one of six causes is behind it. This article shows you how to find and fix it in a few minutes.
tl;dr
Change made in Klar (costs, channel rules, customizations): trigger a Store Update and wait about 30 minutes.
Change made in a Google Sheet: first Sync Data on the data source, then a Store Update.
Report won't load or shows empty values: reset the view via Views → ⋯ → Reset to Default.
Data from a platform stopped arriving: re-authenticate the data source. A Store Update won't fix this.
Error message, several stores affected, or still wrong after 30 minutes: message us in the chat.
What exactly is missing? Find your case
Depending on what you see, you need a different fix. Find the matching row and jump to that section.
What you see | Likely cause | Fix |
You changed costs, rules or settings in Klar, but reports still show old values | The store hasn't been recalculated yet | Store Update |
You changed values in a Google Sheet, but they don't show up | The sheet hasn't been read in yet | Sync Data, then Store Update |
A report loads forever, is empty, or shows values that don't add up | Saved view or browser cache | Reset the view |
Costs or data from a platform are missing from a certain day on | Connection expired | Re-authenticate the data source |
You just connected a source or ad account and no data arrives | Source not linked to your store or channel, or first extraction still running | Check store and channel, then allow up to 24 hours. No data after that? Message us |
Sessions for today or yesterday are missing | Normal GA4 delay up to 48h | Wait |
How up to date is my data?
Klar pulls data automatically. How often depends on the source:
Shopify: Orders arrive continuously, products and inventory once a day. Reports refresh about once an hour.
Ad platforms (e.g. Meta, Google Ads, TikTok): costs are pulled every hour.
Shopware 6: every hour between 6 am and 8 pm, once overnight.
GA4: up to 48 hours of delay. This affects sessions in the Daily Overview. In Attribution, sessions come from the Klar Pixel and are up to date.
Amazon: Amazon's reporting API sometimes delivers orders with a delay.
Google Sheets: see "Google Sheets: When do they sync?" below.
You can see when a source last delivered data and when the next pull runs in the Pulse popover and under Store Configurator → Data Sources. There you can also filter for failed extractions.
Sync Data or Store Update: Which one do I need?
There are two actions, and they do different things:
Sync Data pulls the latest data from a single data source, for example a Google Sheet. It does not recalculate your reports.
Store Update recalculates your entire store with the current data and settings. Only then do changes show up in your reports.
How to trigger a Store Update:
Go to Store Configurator → Store Settings.
Click Update Store Data.
Wait about 30 minutes, then reload the report.
Click Update Store Data only once. Several clicks in a row trigger an error message. If that happens, wait a minute and try again.
Without a manual update, Klar recalculates your store automatically every few hours. The manual Store Update is just the faster way.
Good to know: New or changed channel rules also apply retroactively. After the Store Update, historical orders with matching UTMs are assigned to the new channel too.
Google Sheets: When do they sync?
This applies to all sheet-based sources, for example COGS, Custom Costs, Custom Revenue, CMC, PPS, Influencers, PLC, Targets, Amazon Tax and Bundles.
Manually maintained sheets: Klar syncs automatically 60 minutes after you open the sheet via Store Configurator → Data Sources.
Automatically filled sheets (e.g. via IMPORTRANGE, Make or an API): These sync once a day, overnight between 3 and 4 am. They need a second tab to do so. The tab can be empty. Without a second tab, an automatically filled sheet won't sync.
Need it now? Click Sync Data on the data source, then trigger a Store Update.
Values still don't show after a sync? Check these four points in the sheet:
Status or error column: It shows which rows Klar couldn't read and why.
Date: Entries with a start date in the future only show up from that date on.
Number format: Whole-number fields like impressions, clicks or orders must not have decimals.
Last sync: The column on the right of the sheet shows when it last synced. If nothing changed in the sheet, this date stays the same. That's normal.
💡 Klar's sheets are built for the system. You can't insert rows or change columns. If you want to feed in data automatically, write it to your own tab or sheet and pull it into the Klar template with IMPORTRANGE.
Report won't load or shows empty values
If a Flex Table loads forever, offers no dimensions, stays empty, or two reports don't match, the saved view is usually the cause. Go through these steps in order:
Reset the view: Click Views in the top left, then the three-dot menu ⋯, then Reset to Default.
Reload the page. After a Store Update or a new release, your browser may otherwise still show old data.
Check empty fields: Remove an empty second dimension and check the report's Options.
Open an incognito window or clear your browser cache. Ad blockers, firewalls or VPNs can block single elements.
Still not working? Message us. Then it's not your view.
Data from a platform stopped arriving
If costs or data from a connected platform are missing from a certain day on, the connection has usually expired. This happens after a password change, after changes to users or permissions in the ad account, or as a security measure by the platform. Meta sometimes asks for this regularly.
How to spot it:
Yellow lightning bolt next to the store in the sidebar: a data source needs to be re-authenticated soon. It is not yet flagged under Data Sources.
Warning or red cross on the data source: the connection has expired.
How to reconnect:
Go to Store Configurator → Data Sources.
Open the affected data source and click Reconnect or Re-Authenticate.
Log in with an account that has access to the ad account or property. For GA4, the account must be an admin of the property.
Check every store separately. The same platform can be connected in several stores and then needs to be re-authenticated in each.
Klar then backfills the missing days automatically. A Store Update speeds up the display.
Sync Data and Store Update don't fix an expired connection. Both only work with a working connection. If it has expired, re-authenticating is the only fix.
Common pitfalls when reconnecting:
TikTok says "No accounts found": try connecting in an incognito window.
Microsoft / Bing Ads: Log in with the Microsoft account that has access to the individual ad accounts, not just the manager account.
WooCommerce: If the connection still doesn't work after a Store Update, you need new REST API keys.
New data source, new ad account or new channel
You just connected something new and see no data? Check these three points in this order:
The source isn't connected to your store. A new ad account must be added to every store where it should appear. Under Store Configurator → Data Sources → Add Data Source → Connect Existing Data Source, you can link an existing source to another store.
The source isn't assigned to a channel. Costs only show up in Attribution once the data source is linked to the matching channel in the Channel Builder. Then trigger a Store Update.
The first extraction is still running. Right after connecting, Klar loads your historical data. Give it up to 24 hours. Until then, ad costs may be missing, for example, and CM2 and CM3 are the same. If nothing has changed after 24 hours, message us in the chat.
New shipping type in your logistics costs? A shipping type only appears after at least one order has come in with it. Existing logistics cost setups don't pick up new shipping types automatically. Create a new setup for it.
When should you message us?
Some things you can't fix yourself, because we need to look into your account.
Message us right away if:
an error message appears, for example "Something went wrong" or "creation failed",
several stores or users are affected at the same time,
the data source stays red even after reconnecting,
values are still wrong more than 30 minutes after a Store Update (for sheets: after Sync Data and a Store Update),
data has been missing for more than 24 hours although the connection is active,
the issue concerns an import the Klar team set up for you,
missing days need to be backfilled. Only our team can trigger a backfill.
How we can help you fastest: Tell us the affected store, the data source, the date range and what you've already tried. A screenshot often saves a follow-up question.
